Worcester Sense ll, Operating Instructions Manual, Page: 19 / 48

19
Working with the main menu
Sense ll – 6 720 812 775 (2014/10)
5.3.1 Observe with constant heating circuit (e.g.
swimming pool or ventilation unit)
If the control type Constant is set for a heating circuit, the
operation deviates from the description in the in the following
respects:
•
In the Heating > Operating Mode menu, the automatic
mode is activated for the constant heating circuit (
Auto
) or
the control is permanently switched on or off to a constant
temperature (
On / Off ).
• The constant heating circuit is heated in the automatic
mode by taking account of the time program.
• In the time program, the On and Off operating modes are
available.
• The constant heating circuit is not displayed in the
standard display.
• The temperature for the constant heating circuit can be set
in the service menu only by a competent person.
5.3.2 Adapting Time program for automatic mode
To set the same switching times for multiple days of the week:
▶ Set switching times for a group of days, e.g.
Mon-Sun or Mon-Fri .
▶ Adjust the time program for the specific days of the week
for which different settings are required under Monday -
Sunday (detailed description

Tab. 17, page 21).
Operating the appliance Result
Set the required room temperature for heating and setback mode/setback threshold in automatic mode
▶ Press the menu key to open the main menu.
▶ Turn the selector to highlight the
Heating menu.
▶ Press the selector to open the Heating menu.
▶ If
Type of time program
is set on
Freely adjustable temperature
, press the selector
to open the Setback threshold menu.
▶ If two or more heating circuits are installed, turn the selector to highlight Heating
circuit 1 , 2 , 3 or 4 and press the selector.
▶ Turn and press the selector to set the temperature.
More temperature settings are possible via the time program (

Chapter 5.3.2,
page 19).
▶ If Type of time program is set on 2 temperature levels , press the selector to open
the Temperature settings menu.
Note: The time program can only be set using a App on smartphone or a similar terminal
appliance if this setting is selected.
▶ Turn the selector to highlight Heating or Setback .
▶ Press the selector.
▶ Turn the selector to highlight the desired setting for the setback mode.
▶ Press the selector to activate the selected setting.
▶ Turn and press the selector to set the temperature. The limits of the setting values for
the temperatures are determined by the settings for the other operating mode in each
case.
The controller operates with the modified settings. The settings are applied to all time
programs for the heating system (if two or more heating circuits are installed, it is only
applied in the selected heating circuit).
Table 14 Heating and setback mode/setback threshold for adapting the automatic mode to suit individual preferences
6 720 815 237-20.1O
6 720 815 237-21.1O
6 720 815 237-22.1O
The time program can only be set using an app
on a smartphone or a similar internet
connected appliance if the
Type of time
program > Levels setting is selected.