Worcester Sense ll, Operating Instructions Manual, Page: 33 / 48

33
Working with the main menu
Sense ll – 6 720 812 775 (2014/10)
5.6 General settings
No settings are lost in the event of a brief power failure or if the
heat source is shut down for short periods of time. When the
power supply is restored, the controller resumes operation. If
the shutdown period is prolonged, the settings for the time of
day and the date may have to be reset. No other settings are
required (Tab. 8, page 12).
Menu: Settings
▶ Press the selector to open the Selection heat. circ./DHW menu.
If Total system is selected, all parts of the system are highlighted.
▶ Turn the selector to highlight a heating circuit or a DHW system.
▶ Press the selector.
▶ The selection for the heating circuit or DHW system is undone. Press the selector
again to select the heating circuit or the DHW system again.
Undoing the selection of a heating circuit or DHW system also automatically undoes
the selection of the entire system.
▶ Turn the selector to highlight Continue and press the selector.
The controller operates with the modified settings.
▶ Check the settings for heating and DHW and make any necessary adjustments
(

Chapter 5.5, page 30).
Interrupt a holiday program
During the holiday period, the display indicates when the holiday program will be active
until. If two or more heating circuits are installed, the heating circuit must be selected
before interrupting the holiday program (

Chapter 4.1, page 9).
▶ Press the man key.
Manual operation is activated. The room temperature that is currently valid is shown
in a pop-up window in the lower part of the display.
▶ Change the required room temperature, if necessary.
▶ Press the auto key to reactivate the holiday program.
If the holiday program is set to As Saturday , you can also interrupt the holiday program
by turning the selector. The change is effective until the active time program reaches the
next switching time. The holiday program applies again from this switching time onwards.
Delete the holiday program, e.g. to bring it to an end early
▶ Open the menu for the holiday program (

page 32).
▶ Turn the selector to mark the Delete menu item and press the selector.
A pop-up window appears in the display prompting you to confirm whether the
selected holiday program is to be deleted.
▶ Turn the selector to highlight Yes and press the selector.
▶ A message is displayed in a pop-up window indicating which holiday program has
been deleted.
▶ Press the selector.
The holiday program is deleted.
Operating the appliance Result
Table 29 Setting up, interrupting or deleting a holiday program
6 720 815 237-49.1O
6 720 815 237-50.1O
6 720 815 237-51.1O
Menu item description
Language Language of the display texts
Time format Switch the format for display of the time of
day between 24-hour and 12-hour format.
Time of day All time programs and thermal disinfection
run according to this time. The time of the
day can be set in this menu.
Date format Change the format of the date.
Table 30 General settings