4
Product details
Greenstar FS CDi
ErP
– 6720919078 (2015/12)
2
Product details
2.1
General information
Servicing
•
The boiler must be serviced annually by a competent,
registered gas engineer, such as a Worcester service
engineer, or other Gas Safe registered engineer.
•
Always use original spares, to help maintain the efficiency,
safety and reliability of the boiler and have the Service
Record completed in the Benchmark Checklist.
The completed Benchmark Checklist will be required in the
event of any guarantee work and may be required by the local
Building Control Inspector.
BENCHMARK STANDARD
The Benchmark initiative is a
code of practice to encourage
the correct installation,
commissioning and servicing of
domestic central heating boilers
and system equipment.
A checklist/logbook is supplied with every boiler and can be
found at the back of the Installation, Commissioning and
Servicing Instructions. This is a vital document that needs to be
completed by the installer at the time of installation. It confirms
that the boiler has been installed and commissioned according
to the manufacturer's instructions.
The logbook provides space for the recording of regular
servicing of the boiler/heating system and this can become a
valuable document when, for example, you wish to sell the
property. The log book will show a potential purchaser that the
heating system has received regular professional maintenance
and servicing during its lifetime.
The Benchmark initiative aims to:
•
Raise standards among professional installers
•
Build and maintain high safety standards in the industry
•
Improve customer satisfaction levels
•
Make a contribution to the nation's commitment to climate
change
2.2
Product data on energy consumption
The product data on energy consumption can be found in the
Installation, Servicing and Maintenance instruction manual for
contractors.
Ensure that the service engineer completes
the Service Record in the Benchmark
Checklist after each service. The Benchmark
Checklist and service interval record can be
found at the back of the Installation,
Commissioning and Servicing Instructions.
