Wopa SA0061, User Manual

Page: 12 / 47

User manual
SA0061 Cattle Crush
Version: 09-07-18
Page 12 of 47
Main components of SA0061:
Figure 1 Component Description See
Section
1 Front gate

The front gate can be set hydraulically in three
different positions:
 Fully open: the animal can walk out of the front
of the box.

Partially open: the animal's head will pass
through the front gate, but the withers will not.
 Closed: the front gate is closed behind the head
of the animal.
-
2 Foreleg support
 The foreleg of the animal can be secured to the
foreleg support with the aid of a hydraulic winch
to allow the foreleg to be worked on.
5.7
3 Electrical connection
cable
 The crush must be connected to an electrical
supply to power the controls and the hydraulic
unit.
4 Folding gate

A folding gate used to guide the animal is
provided as standard.
5 Hydraulic rear gate
 Once the animal is located in the box the rear
gate is placed loosely against its rear.
6 Rear leg (hydraulic)
 Once a belt or hook has been secured to the
rear leg the leg can be raised using the
hydraulic winch to allow the hoof to be worked
on.
7 Belly belt (hydraulic)

Once the animal is located in the crush the belly
belt behind the forelegs is raised hydraulically.
8 Transport equipment
 A shaft, clamps and mudguards are attached to
the crush to allow transport on the public
highway.
9 Stabiliser legs

The 4 stabiliser legs are used to set the crush
to the correct height using the hydraulic lift.
These must be fully raised and secured for
transport.
10 Folding drawbar
 The drawbar must be folded out and secured
for transport on the public highway.