User manual
Treatment crush: SA0042
Version: 10 February 2021 08:02:46
Page 27 of 34
6. Maintenance
ATTENTION!
Always disconnect the machine from the power supply by setting the switch to
0 and disconnecting the plug.
Test the installation after maintenance work or repairs have been carried out to
make sure the installation can be safely used again.
Only trained technicians may perform the maintenance work described or
make repairs.
6.1. Maintenance diagram
The diagram below shows the maintenance activities that must be done.
Activity
note
D
a
ily
w
e
ek
ly
E
v
e
ry
1
00
a
n
im
al
s
A
n
n
u
al
ly
E
v
e
ry
2
y
e
a
rs
See
section
General
Check panic locks and hooks
Replace in case of visible damage
Check ropes and chains
Replace in case of visible damage
Check plugs, cables, controls
and connections
Alert a qualified professional in case
of visible damage.
Cleaning
Cleaning the machine
6.2
Lubrication
Grease nipples on back gate
sliding section
Bearing grease
6.3
Other grease nipples
Bearing grease
Hydraulic installation
Check the fluid level
Inspection is required every 500
animals or in case of leakage.
6.4
Replace oil and filter
