background image

 16 

 

Woosh Bikes 

 

DECLARATION OF CONFORMITY 

 

Product name 

Commercial name(s) 

Electrically power as-
sisted cycle 

 

 

 

 

 

Woosh Sirocco                                  Woosh Sundowner 

Woosh Sirocco CDL                          Woosh Big Bear LS 

Woosh Big Bear                                Woosh Gale 

Woosh Krieger                                  Woosh Zephyr CDN 

Woosh Zephyr B                               Woosh Gallego 

Woosh Petite 

Woosh Sant Ana 

Woosh Sant Ana CD/CDL 

Manufacturer, address 

Made in China for Woosh Bikes Ltd 

42-46 Queens Road, Southend-on-Sea, Essex, SS1 1NL, UK

 

The product (system) identified above is in conformity with the listed European Directive(s). 

The following table identifies the applied standards and the conformity assessment procedure.

 

EMC DIRECTIVE 

2004/108/EC 

OJ DEC. 2004 L 390/24 

 

Applicable         Non Applicable 

TWO or THREE-WHEEL MOTOR 

VEHICLES DIRECTIVE 

2002/24/EC 

OJ May 2002 L 124/1 

Applicable          Non Applicable 

MACHINE DIRECTIVE 

2006/42 EC 

OJ MAY 2006 L 157/24 

 

Applicable         Non Applicable 

- Applied Standards 

 

EN 15194 

 

EN61000-4-2 

 

EN 55022 

 

- Applied Standards 

 

EN 15194 

- Applied Standards 

 

EN 15194 

Date 

01/01/2013 

Signature 

 

Authorised representative 

Director—Woosh Bikes Ltd 

Summary of Contents for Santana 2018


















Reviews: