13
Operating the lights:
The rear light is already fitted, to operate the rear light, simply press the button on the top of the light as
shown below.
To change the batteries in this unit, simply reach under the bottom edge and then pull the lower edge of
the light rearwards towards you. This unit requires 2x AA batteries.
If your light doesn’t work initially, it is likely that the insulating material fitted at the factory to stop the
battery going flat is still in place. Simply pull the external tag, or if necessary, access the battery compart-
ment and remove the small plastic insulator that sits between the battery and terminal.
The front light may also have a insulating tag that needs to be pulled/removed. The front light uses 2x AA
batteries. The on/off button is located on the top of the lamp. To change the batteries, press down on the
small black clip at the base of the lamp, and lift the lamp/reflector clear. The batteries should be oriented
as shown below.
