Opti-Link
WOODWAY
Installation and Operation
Woodway Engineering Ltd
OPTINS-4.0 Rev 4
Page 1 of 9
December 2007
Disclaimer
This document is intended to be used as a reference guide for the installation and operation of the Opti-Link Control
System.
Every effort has been made to ensure the reliability and accuracy of the information contained in this manual at the time of
going to press. However, specifications and procedures are subject to change due to our constant endeavours to meet
customer requirements, and to maintain a research and development process of continuous improvement for all
Woodway products.
Woodway Engineering Ltd reserves the right to make changes in product and documentation specifications and
procedures at any time and without notice. The information contained in this manual is believed to be reliable and
accurate with regard to the Opti-Link Control System. The company shall not be held liable for improper installation,
operation, or maintenance of the system in circumstances where procedures and specifications have not been followed
correctly. It is essential therefore, that you follow the specifications, procedures, and recommendations outlined in this
manual.
©2005 Woodway Engineering Ltd. All Rights Reserved
Important Installation and Safety Notes
Modules and connectors are not waterproof. Install modules and cables in a dry
location away from excessive heat, humidity and any components likely to
damage the system.
It is the installer’s responsibility to ensure that;
the method of installation does not damage or interfere with vehicle
equipment and wiring.
if the vehicle is fitted with airbags, the installation does not interfere
with the operation or effectiveness of the airbags or will cause the
equipment to become a projectile that could cause death or injury.
all connections to chassis are taken direct to the battery.
fuse ratings are changed to suit specific applications.
The proximity of certain radio equipment may interfere with Opti-Link data
transmission. To reduce this possibility, Opti-Link and radio equipment wiring
should always be kept well apart and should not, under any circumstances, be
harnessed or fastened together.
The installers should supply all mounting fixings.
It is the user’s responsibility to ensure that;
the system is used in a safe and responsible manner to ensure the
safety of both themselves, their passengers, other road users and
pedestrians.
the system and its installation are properly maintained to ensure its
effective operation.
Failure to follow these notes and safety guidelines may result in damage to the
product and/or vehicle and may cause injury to personnel or bystanders.
