Woodward SYNCONpanel, Brief Manual

Page: 5 / 27

Manual 37187A SYNCONpanel - Transportable Remote Synchronizing Panel
Chapter 1.
General Information
Related Documents
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
This brief manual can only be used together with the complete documentation set of the GCP-31/
RPQ + SC08 .
Type English German
GCP-31/32 Series
GCP-31/32 - Installation 37239 GR37239
GCP-31/32 - Configuration 37278 GR37278
GCP-31/32 - Function/Operation 37238 GR37238
GCP-31/32 - Application 37240 GR37240
Additional Manuals
LeoPC1 - Manual 37146 GR37146
PC program for visualization, configuration, remote control, data logging, language upload, alarm and user management and man-
agement of the event recorder. This manual describes the use of the program.
LeoPC1 - Manual 37164 GR37164
PC program for visualization, configuration, remote control, data logging, language upload, alarm and user management and man-
agement of the event recorder. This manual describes the programming of the program.
Table 1-1: Manual - Overview
Intended Use
This control is intended to be operated according to the guidelines described in this manual. The
prerequisite for a proper and safe operation of the product is correct transportation, storage, and installation as
well as careful operation and maintenance.
NOTE
This manual has been developed for a control fitted with all available options. Inputs/outputs, func-
tions, configuration screens and other details described, which do not exist on your control may be ig-
nored.
The present manual has been prepared to enable the installation and commissioning of the control.
Due to the large variety of parameter settings, it is not possible to cover every combination. The man-
ual is therefore only a guide. In case of incorrect entries or a total loss of functions, the default settings
can be taken from the list of parameters located in the appendix of the Configuration manual.
NOTE
When using the SYNCONpanel together with the GCP-31/ RPQ + SC08 , it is not possible to configure and
control the GCP-31/ RPQ + SC08 remotely using LeoPC1 via CAN connection.
© Woodward Page 5/27