Manual 37615C
SPM-D2-10 - Synchronizing Unit
Page 38/68
© Woodward
CAUTION
Please note that configuration only should be done when the system is not in operation.
NOTE
Please note the parameter list located in Appendix C of this manual.
The configuration mode is initiated by pressing the "Digit
" and "Cursor
" pushbuttons simultaneously. The
control is advanced through the various parameters by pressing the "Select" pushbutton. By pressing and holding
the "Select" pushbutton the AUTOROLL function will be enabled permitting the user to rapidly advance through
the parameter screens. The control unit will permit the operator to reverse up to previous screens (exception: it is
not possible to reverse from the first parameter to the last parameter or to backup through the service screens). To
access the previous parameter screen, press the "Select" and "Cursor
" push button simultaneously. If an entry,
modification, or any other action is not carried out for 10 minutes, the unit reverts to the automatic mode.
Configure Basic Data
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
Parameter 1700
SPRACHE/LANGUAGE
english
Language selection
German/English
The desired language for the configuration and display screens is selected here. Ei-
ther German or English may be selected.
Parameter 945
Softwareversion
x.x
-y
zzzzz
Softwareversion
x.x
indicates the release.
-y
indicates the hotfix version.
zzzzz indicates the build number (hand off)
