Manual 37615C
SPM-D2-10 - Synchronizing Unit
© Woodward
Page 3/68
Copyright And Disclaimer
Disclaimer
All information and instructions in this manual have been provided under due consideration of applicable guide-
lines and regulations, the current and known state of the art, as well as our many years of in-house experience.
Woodward GmbH assumes no liability for damages due to:
•
Failure to comply with the instructions in this manual
•
Improper use / misuse
•
Willful operation by non-authorized persons
•
Unauthorized conversions or non-approved technical modifications
•
Use of non-approved spare parts
The originator is solely liable to the full extent for damages caused by such conduct. The agreed upon obligations
in the delivery contract, the general
terms and conditions, the manufacturer’s delivery conditions, and the statuto-
ry regulations valid at the time the contract was concluded, apply.
Copyright
This manual is protected by copyright. No part of this manual may be reproduced in any form or incorporated into
any information retrieval system without written permission of Woodward GmbH.
Delivery of this manual to third parties, duplication in any form - including excerpts - as well as exploitation and/or
communication of the content, are not permitted without a written declaration of release by Woodward GmbH.
Service And Warranty
Our Customer Service is available for technical information. Please see last page for the contact data.
Warranty terms
Please enquire about the terms of warranty from your nearest Woodward representative.
For our contact search webpage please go to: http://www.woodward.com/Directory.aspx
Intended Use
The SPMD device must be used exclusively for synchronization of two electrical systems. By opening the device
you will loose any warranty.
Any unauthorized modifications to or use of this equipment outside its specified mechanical, electrical, or other
operating limits may cause personal injury and/or property damage, including damage to the equipment. Any
such unauthorized modifications: (1) constitute "misuse" and/or "negligence" within the meaning of the product
warranty thereby excluding warranty coverage for any resulting damage, and (2) invalidate product certifications
or listings.
Before starting any operation and after any modification of the parameterization make a documentary proof that
your programming and parameterization meets the requirements of your synchronization concept.
Typical applications for this product family/device line are for instance:
Synchronizing a mains parallel Generator to the mains
Any usage beyond these applications the devices are not designed for. This applies also to the use as a partly
completed machinery. The manufacturer cannot be held liable for any resulting damage, the user alone bears the
risk for this. As to the appropriate use of the device: The technical data and tolerances specified by Woodward
have to be met.
