Woodward GECO, Technical Manual, Page: 88 / 90

GECO

Stoichiometric Manual 03554
80 Woodward
Boolean Input/Output Parameters
Boole
a
n
Ad
d
ress
Ta
ble
In
de
x
Bit
Parameter
Name Parameter
Description Clear Set
Use
r Set
Use
r Clear
1 0 0 MAP1_HIGH_AL MAP voltage high alarm OK FAULT 0 1
7 6 BAT_HIGH_AL Battery voltage high alarm OK FAULT 0 1
9 1 0 MAP1_LOW_AL MAP voltage low alarm OK FAULT 0 1
15 6 BAT_LOW_AL Battery voltage low alarm OK FAULT 0 1
35 4 2 TC2_LOW_EXP_AL TC2 lower than expected alarm OK FAULT 0 1
36 3 TC1_LOW_EXP_AL TC1 lower than expected alarm OK FAULT 0 1
39 6 TC2_HIGH_AL TC2 open (high) alarm OK FAULT 0 1
40 7 TC1_HIGH_AL TC1 open (high) alarm OK FAULT 0 1
42 5 1 MEM_AL Bad memory byte alarm OK FAULT 0 1
43 2 COP_AL COP fail detected alarm OK FAULT 0 1
44 3 EXEC_AL Illegal instruction execution detected alarm OK FAULT 0 1
45 4 CLOCK_AL Clocks stopped alarm OK FAULT 0 1
46 5 STACK_AL Stack overflow alarm OK FAULT 0 1
47 6 TIMING_AL A/D conversions not completed alarm OK FAULT 0 1
48 7 ISR_AL Unscheduled or improper interrupt alarm OK FAULT 0 1
50 6 1 EGO3_OPEN_AL Open EGO3 connection or lazy EGO3 sensor alarm OK FAULT 0 1
51 2 EGO2_OPEN_AL Open EGO2 connection or lazy EGO2 sensor alarm OK FAULT 0 1
52 3 EGO1_OPEN_AL Open EGO1 connection or lazy EGO1 sensor alarm OK FAULT 0 1
53 4 ADAPT_POS_AL Adaptive hit positive limit alarm OK FAULT 0 1
54 5 ADAPT_NEG_AL Adaptive hit negative limit alarm OK FAULT 0 1
61 7 4 EGO2_LEAN_AL CL on bank 2 hit positive limit alarm OK FAULT 0 1
62 5 EGO2_RICH_AL CL on bank 2 hit negative limit alarm OK FAULT 0 1
63 6 EGO1_LEAN_AL CL on bank 1 hit positive limit alarm OK FAULT 0 1
64 7 EGO1_RICH_AL CL on bank 1 hit negative limit alarm OK FAULT 0 1
65 8 0 OVERSPEED_AL OverSpeed detected alarm OK FAULT 0 1
70 5 EGO3_HIGH_AL EGO3 voltage high alarm OK FAULT 0 1
71 6 EGO2_HIGH_AL EGO2 voltage high alarm OK FAULT 0 1
72 7 EGO1_HIGH_AL EGO1 voltage high alarm OK FAULT 0 1
77 DP1_LOW_AL DP low alarm OK FAULT 0 1
78 DP1_HIGH_AL DP high alarm OK FAULT 0 1
79 DP1_LOW_EXP_AL DP lower than expected alarm OK FAULT 0 1
80 DP1_HIGH_EXP_AL DP higher than expected alarm OK FAULT 0 1