Woodward easYlite-200, Manual, Page: 23 / 34

Where the “Mute button TX enable” box is checked in the ToolKit
configuration screen, the easYlite-200 can silence the horn signal
from the easYgen device (depending on the configuration). If this
function is not active, the easYlite can only turn off its own flashing
LEDs.
Once the configuration is complete, the user can print the LED
labels by means of the “Label print” button. The following screen
opens:
Fig. 11: Label print screen in ToolKit
Once printed, the (two) paper strips with the signal designations
can be inserted from top, as indicated by the arrows in Fig. 12
below:
Fig. 12: Panel labelling
Configuration
easYgen: LED Configuration a...
37903A easYgen Expansion Module | LED Lamp Expansion Module 23