Manual 37441C
DTSC-50 - ATS Controller
© Woodward
Page 9/106
The DTSC-50 generator set controller provides the following functions:
•
Genset control
•
Engine and generator protection
•
Engine data measurement -
o
including battery voltage, service hours, etc.
•
Generator voltage measurement
•
Alarm display with circuit breaker trip and engine shutdown
•
AMF (automatic mains failure) standby genset control with automatic engine start on a mains failure de-
tection and open transition breaker control
•
Password protected configuration
Intended Use
The control unit must only be operated as described in this manual. The prerequisite for a proper
and safe operation of the product is correct transportation, storage, and installation as well as careful operation
and maintenance.
NOTE
This manual has been developed for a unit fitted with all available options. Inputs/outputs, functions,
configuration screens and other details described, which do not exist on your unit may be ignored.
The present manual has been prepared to enable the installation and commissioning of the unit. Be-
cause of the large variety of parameter settings, it is not possible to cover every possible combination.
The manual is therefore only a guide. In case of incorrect entries or a total loss of functions, the de-
fault settings can be taken from the enclosed list of parameters.