Woodward 9907-026, Product Manual

Page: 18 / 32

Load Sharing Module (Analog Output) Manual 02029
12 Woodward
12. Remove the phase A CT wires from terminal 5 and 6 and connect the phase
A CT wires to the phase B input terminals 6 and 7.
13. Start the engine and apply full load.
14. Measure the load signal voltage between terminals 22 and 23 and record
this voltage.
15. Shut the generator set down and reverse the phase A CT wires on terminals
6 and 7.
16. Start the engine and apply full load.
17. Measure the load signal voltage between terminals 22 and 23 and record
this voltage.
18. Shut down the generator set.
19. Remove the phase A CT wires from terminal 6 and 7 and connect the phase
A CT wires to the phase C input terminals 8 and 9.
20. Start the engine and apply full load.
21. Measure the load signal voltage between terminals 22 and 23 and record
this voltage.
22. Shut the generator set down and reverse the phase A wires on terminals 8
and 9.
23. Start the engine and apply full load.
24. Measure the load signal voltage between terminals 22 and 23 and record
this voltage.
25. Shut down the generator set.
26. Remove the phase A CT wires from terminal 8 and 9 and connect the phase
A wires to the pair of terminals, in the same polarity, that produced the most
positive load signal voltage.
27. Untape and disconnect the Phase B CT wires. Connect the phase B CT
wires to one pair of the two remaining CT input terminals on the Load
Sharing Module.
28. Start the engine and apply full load.
29. Measure the load signal voltage between terminals 22 and 23 and record
this voltage.
30. Shut the generator set down and reverse the phase B wires on the CT input
terminals
31. Start the engine and apply full load.
32. Measure the load signal voltage between terminals 22 and 23 and record
this voltage.
33. Shut down the generator set.