Assembly
31
MAN1048 (4/16/2014)
DISASSEMBLE SHIPPING UNIT
(FIGURE 26)
Remove cutter from pallet or wood block.
Remove all parts that are zip tied to cutter.
Remove cap screws and flange lock nuts that are
securing Lift Arms (4) and Break Links (3) to cutter.
Remove cap screws and flange lock nuts that are
securing Tailwheel Bracket (9) to cutter.
Remove Upper Mounting Hardware (2) from A-Frame
Bars (1).
ASSEMBLE CUTTER
(FIGURE 27)
Figure 27
. Cutter Assembly
1.
Attach Tailwheel Bracket (9) and Lift Arms (4) to
cutter rail using 1/2 NC x 2 cap screws (17) and 1/2
NC flange lock nuts (19).
2.
Select desired height adjustment holes and secure
Tailwheel Bracket (9) with 1/2 NC x 1-1/2 cap
screws (18) and 1/2 NC flange lock nuts (19).
3.
Rotate A-Frame Bars (1) up and attach Break
Links (3), Sleeve (2) to lower hole in top of A-
Frame Bars (1) using 3/4 NC x 5-1/2 cap screw
(13) and 3/4 NC lock nut (14).
4.
Rotate Lift Arms (4) upward and attach to Break
Links (3) using Sleeves (5), 5/8 NC x 2-1/2 cap
screws (15), and 5/8 NC flange lock nuts (16). See
Attaching Cutter to Tractor, pg. 12
for
adjustments.
5.
Attach Rubber Belting (8) and Belting Bar (10) to
front of cutter using 3/8 NC x 1-1/4 carriage bolts
(11) and 3/8 NC flange lock nuts (12). (Omit if
installing optional chain shielding).
6.
Secure Tailwheel (7) to Tailwheel Bracket (9) using
33 mm washer (6) and spirol pin (20).
1. A-Frame bar
2. .75 x 1.25 x 3.0 Sleeve
3. Break link
4. Lift arm
5. .626 x 1.00 x 1.26 Sleeve
6. .33 mm Flat washer
7. Tailwheel
8. Rubber belting
9. Tailwheel bracket
10. Belting bar
11. 3/8 NC x 1-1/4 Carriage bolt
12. 3/8 NC Flange lock nut
13. 3/4 NC x 5-1/2 Cap screw
14. 3/4 NC Lock nut
15. 5/8 NC x 2-1/2 Cap screw
16. 5/8 NC Flange lock nut
17. 1/2 NC x 2 Cap screw
18. 1/2 NC x 1-1/2 Cap screw
19. 1/2 NC Flange lock nut
20. Spirol pin