Rev 3.0/10-06
QUADRA-TILT ROTATOR • DC-VOLTAGE
Page 2
WARNINGS
Powr-Grip is pleased to offer the most reliable vacuum lifters available.
Despite the high degree of security provided by this product, certain
precautions must be observed to protect the operator and others.
Always
wear personal protective equipment that is appropriate for the material being handled.
Follow trade association guidelines.
Always
operate the lifter under conditions approved for its design (see INTENDED USE:
O
PERATING
E
NVIRONMENT
).
Never
operate a lifter that is damaged, malfunctioning, or missing parts.
Never
operate a lifter if the sealing edge of any vacuum pad is cut or otherwise damaged.
Never
remove or obscure warning labels.
Never
operate a lifter if the Load Capacity or any warning appears to be missing or obscured.
Always
make certain the contact surfaces of the load and all vacuum pads are clean prior to
applying the pads (see MAINTENANCE: V
ACUUM
P
AD
M
AINTENANCE
).
Never
exceed the Load Capacity or attempt to lift loads the lifter is not designed for (see
INTENDED USE: L
OAD
C
HARACTERISTICS
).
Never
attempt to lift cracked or broken glass with this lifter.
Always
position the vacuum pads correctly on the load prior to lifting (see OPERATION: T
O
A
PPLY
THE
P
ADS TO A
L
OAD
).
Never
lift a load when any vacuum indicator shows inadequate vacuum.
Never
touch the vacuum release controls during a lift. This may result in loss of attaching
vacuum and release of the load.
Never
allow people to ride on the lifter or the load being lifted.
Never
lift a load higher than necessary or leave suspended loads unattended.
Never
lift a load over people.
Always
keep other personnel far enough away from the lifter to avoid injury in the event of an
unexpected load release.
Always
place the power control in the inactive position and, when possible, disconnect the
power source before opening any enclosure on the lifter. (Only applicable to powered lifters)
Always
remember that modifications to the lifter may compromise its safety. Wood’s Powr-Grip
cannot be responsible for the safety of a lifter that has been modified by the customer. For
consultation, contact Wood's Powr-Grip.
