44
Assembly
MAN0764 (11/5/2008)
Figure 38
. Belt Shielding Installation - Right Wing
Winch Kit Installation (Optional)
1.
Locate and drill one 9/16" hole in each wing using
dimensions shown in Figure 39. Assemble items 1,
2, 3 and 4. Use assembly to locate and drill
remaining holes.
2.
Secure idler brackets (1) and rollers (2) to deck
with bolts (5) and nuts (6).
3.
Remove cylinder pin: Place channel (10) over
cylinder and cylinder lug. Place wing lock-up
bracket over channel and insert pin (8), washers
(7), and cotter pins (9). NOTE: Washers (7) are
used as spacers and are placed between lock-up
bracket and channel (10) as needed.
Figure 39
. Roller Assembly Installation
4.
Repeat step to install second channel (10) on
opposite wing.
5.
Attach winch assembly to channels (10) using bolts
(5) and lock nuts (6).
6.
Move SMV sign and hardware to channel as
shown.
7.
Tighten all hardware. See Parts page 79 for
complete diagram and part list.
Figure 40
. Winch Channel Installation
1. Front right wing belt shield plate, outer
2. Front wing belt shield plate, inner
3. Front wing belt shield plate, center
4. Bent link, .25 x 1.61 x 23.50
5. Rear right wing belt shield plate, inner
6. Link .25 x 1.00 x 27.00
7. Rubber belt, .25 x 8.50 x 27.25
8. Rubber belt, .25 x 8.50 x 43.50
9. Rubber belt, .25 x 8.50x 36.05
10. Rubber belt, .25 x 8.88 x 54.50
11. Rubber belt, .25 x 3.64 x 28.00
12. 1/2 NC x 1-1/2 Carriage bolt GR5
13. 1/2 NC Flange lock nut
14. 3/8 NC x 1 Carriage bolt GR5
15. 3/8 NC Flange lock nut
Summary of Contents for BATWING BW1620X
Page 50: ...50 Parts MAN0764 11 5 2008 MAIN FRAME ASSEMBLY FRONT SECTION Rev 9 1 2016...
Page 52: ...52 Parts MAN0764 11 5 2008 MAIN FRAME ASSEMBLY REAR SECTION Rev 4 5 2010...
Page 54: ...54 Parts MAN0764 11 5 2008 WING ASSEMBLY Right Wing Shown Rev 9 1 2016...
Page 56: ...56 Parts MAN0764 11 5 2008 WING CENTER GEARBOX ASSEMBLY...
