3A
4A
4B
Rev 1.0/12-19
MRTALPCH6-DC3(RC): #35125
11
3) Align the bolt holes in the pad frame extension with those in the pad frame (fig. 3A).
4) Secure the pad frame extension in the pad frame by installing and tightening all bolts
securely (figs. 4A-B).
5) Connect the vacuum hose to the vacuum pad on the pad frame extension (see
Vacuum Hoses” on page 11 and “Connecting/Disconnecting Vacuum Hoses” on page 12
6) Repeat steps 2-5 to install the other pad frame extension.
7)
7A
Reverse steps 2-6 To remove pad frame extensions.
1
Store
removed extensions in a clean, dry location. Use the pad covers
supplied (fig. 7A) to keep the vacuum pads clean.
Routing Vacuum Hoses
Each of the 2 pad frame configurations requires different vacuum hose routing; see labels on
blue hoses for assistance.
For the
1A
6-pad configuration (fig. 1A):
1) Connect the red hose (R) from the vacuum
pad on a pad frame extension as shown.
2) Connect the blue hose (B) as shown.
3) Repeat steps 1-2 for the other frame
extension
1..... The pad frame extensions do not need to be removed when using the 4-pad configuration unless they would inhibit (or otherwise compromise
safety of) loading, positioning a load or releasing a load.
ASSEMBLY
