WOOD'S POWR-GRIP MRT410LDC3, Operating Instructions Manual

Page: 28 / 50

MRT4-DC3: #35068 Rev 6.2/2-20 26
A
FTER
U
SING THE
L
IFTER
1)
1A
Press the power button ( , fig. 1A)
and the “function” button ( , fig. 1A)
to power down the vacuum lifter.
2) Charge the battery after each workday
as needed (see “12-V
OLT
B
ATTERY
R
ECHARGE
” on page 34).
1
3) Use the hoisting equipment to lower
the lifter gently onto a stable support.
Then detach the hoisting hook from
the lift point.
Caution: Do not set lifter on surfaces
that could soil or damage vacuum
pads.
4) To transport the lifter, secure it in the original shipping container with the original
restraints or equivalent.
Storing the Lifter
1)
1B
Use the covers supplied to keep the vacuum pads
clean (fig. 1B).
!!–CE–!!
To prevent the lifter from tipping over on
relatively horizontal surfaces, place the vacuum pads
facedown on a clean, smooth, flat surface. Then lower the
lift bar and place a support under the lift point.
2) Charge the battery completely and repeat every 6
months (see “12-V
OLT
B
ATTERY
R
ECHARGE
” on page 34).
1..... To maximize battery life, charge it promptly after each use.
OPERATION