WOOD'S POWR-GRIP MRT410LDC3, Operating Instructions Manual

Page: 19 / 50

Rev 6.2/2-20 MRT4-DC3: #35068 17
T
O
A
TTACH THE
P
ADS TO A
L
OAD
Make sure the contact surfaces of the load and vacuum pads are clean (see
“Pad Cleaning” on page 33).
Positioning the Lifter on the Load
1)
1A
Center the pad frame on
the load (fig. 1A).
1
2)
2A
Make sure all vacuum pads
will fit on the load and will
be loaded evenly (fig. 2A).
Consult the Per-Pad
Load Capacity.
3) Place the vacuum pads in
contact with the load
surface.
1..... The lifter is designed to handle the maximum load weight when the load’s center of gravity is positioned within 2" [5 cm] of the lifter’s rotation
axis. Uncentered loads may rotate or tilt unexpectedly.
OPERATION