Woodpeckers LED.D, Instruction Manual, Page: 17 / 24

15
Faulty Possible cause Solutions
“EA”is blinking shown on
the screen, and the buzzer
rings continuously.
Have used faulty adapter
with excessive output.
Change to the original
adapter with output of
5V/1A
“E1” shown on the screen. Low battery.
Reconnect the charger, if
”E1” show again
after 15 minutes please
change the battery.
The equipment is not
charging when the adapter
is connected.
1. The adapter is not
connected well.
2. Faulty of adapter or
incompatible.
3.The charging point is
impurity.
1. Reconnect.
2. Change the adapter.
3. Cleaned by the alcoho.
Light intensity is weak.
1. The optical fiber is not
installed well.
2. There is crevice on the
optical fiber.
3. There is resin on the tip
of the optical fiber.
1. Reinstall the optical
fiber.
2. Change a new optical
fiber.
3. Clear the resin.
Effective duration of the
battery become short.
The capacity of the battery
decreased.
Change a new battery.
T h e m o d e i n d i c a t o r
twinkles when charging.
1. Low voltage.
2. Short-circuit of the
battery.
1. Back to normal after 15
minuets charging.
2. Change a new battery.
If the problem still can’t be solved, please contact with local dealer or
manufacurer.
13. Packing list
The components of the equipment are listed in the packing list.
14. Environment protection