Woodpecker E-COM, Instruction Manual

Page: 13 / 29

11
4.4 Preset programs
Select the self-defining program
that need to be replaced.
Long press key to get into the
interface of file system. Press key
or key to select needed
file system. Press the key to
confirm, and press the key to
log out.
M1
W3-Pro
W3-ONE
W3-Single
M1
W3-Pro
W3-ONE
W3-Single
Press key to get into the
interface of corresponding file
system. Press key or key
to select needed file model
（ ② ）
, the corresponding rotation
direction, speed, and torque value
（ ③ ）
. Press the key to
confirm, and press the key to
log out.
After selecting the file system,
the selected one will replace the
former program
.
4.5 Battery Charging
If the battery icon turns into
display that as the picture shown,
it indicates that the battery
capacity is very low. Please
charge.