Woodland Mills HM130MAX, Operator'S Manual

Page: 59 / 96

HM130MAX Operator’s Manual
DIRECTION OF CUT
Always cut in the direction shown below. The log clamps are located to the right side of the log
with the log supports on the left. Failure to cut in this direction can cause the log to come loose
and possibly cause damage or injury.
Always ensure the saw blade teeth are orientated such that they are cutting into the wood and
not being dragged backwards across it. Some blade manufacturers ship their saw blades inside
out (backwards) due to manufacturing processes and they must be flipped prior to installation.
**Please follow the instructions in the SAWMILL SET-UP PROCEDURES section. Failure
to do so may result in poor sawing performance, damage or injury.**
HM130MAX-MY2020: Rev B Page of 57 92 04-Dec-2019
Right
Side
Left
Side
Log Supports
G G
Saw Blade Teeth Orientation
Dire
ction
of C
ut
Saw Blade
Direction
Log Clamps