Woodland Mills BANDSAW BLADE SHARPENER, Operator'S Manual

Page: 5 / 56

Sharpener Operator’s Manual
INTRODUCTION
This operator’s manual describes in detail
how the bandsaw blade sharpener is used
and maintained and how servicing is to be
carried out. It also describes the measures
to be taken for maximum safety and how the
safety features are designed and function, as
well as how they are inspected, maintained,
and repaired if necessary.
Note: The section dealing with safety
must be read and understood by all those
who install, use, or repair the sharpener.
The operator’s manual comprises installation,
usage, and the maintenance procedures to
be performed by the operator. More
comprehensive servicing or troubleshooting
should not be performed unless instructed by
a service technician.
The operator’s manual describes all the
requisite safety features and should be read
and understood by the user before the
sharpener is assembled.
Symbols and warning signs shown on this
page can be found in this operator’s manual
and on the sharpener. If a decal on the
sharpener has been damaged or is worn, a
new warning decal must be applied as soon
as possible in order to ensure the greatest
possible safety when using the sharpener.
The bandsaw blade sharpener shall only be
used for bandsaw blades with hardened
teeth. The bandsaw blade width shall be
1.25 in [32 mm].
KEY SYMBOLS
MANDATORY ACTIONS
The symbols below used in this operator’s
manual:
WARNINGS
The decal with the symbols below are found
on the bandsaw blade grinder:
BBS-MY2020-EN: Rev A Page of 3 52 19-May-2020
Read the manual carefully before
attempting to use the bandsaw
blade grinder.
Wear protective gloves.
Wear protective eyewear.
Exercise caution.
Battery polarity warning.