4
1
4
2
3
SIZE 1/4” FENCES - CONT
Temporailary remove the Edge Fence. Place the Router/Router Plate on the Tracks with
the Plate Guide between the 36” Ultra Tracks. Adjust the front and back Stops so the router
bit won’t strike the Front or Back Fences.
Clamp the Dado Jig to a workbench using clamps
(not provided)
.
Temporarily place some scraps of 3/4” thick material under the
center portion of the Stationary & Adjustable Tracks/1/4” Fences
to support them as you use the router to size the 1/4” Fences.
Re-install the Edge Fence
once completed.
SIZE 1/4” FENCES - CONT
1. Place the Router/Router Plate on the Dado Jig against the back Router Plate
Stops
(make sure bit is not touching the 1/4” MDF Fence)
.
2. With the Plate Guide between the Stationary & Adjustable Ultra Tracks, turn the router on
and, while holding the edge of the Plate Guide against the inside edge of the
Adjustable Track, pull the router forward along the Adjustable Track.
3. When you contact the front Router Plate Stops, slide the router to
the left so the Plate Guide is against the Stationary Track.
4. While holding the edge of the Plate Guide against the inside
edge of the Stationary Track, push the router rearward along
the Stationary Track to the back Router Plate Stops.
The 1/4” MDF fences are now sized to your router bit and
you are now ready to cut dadoes with the Dado Jig.
Reattach the Edge Fence to the
Front Fence.