2
6.5”
MB020 x16
5760B x16
Work Stops x2
MF015 x4
7900B x1
5760B x4
HB030 x2
7900E x2
BUSH002 x2
5540 x2
ATTACH BACK & FRONT FENCES
Install 1/2” screws
(MB020)
through the 8 countersunk holes in each Track Bracket
(reposition the
Adjustable Fence as necessary)
and start an oval nut
(5760B - flat side first)
on each end.
Install the 12” Back Fence
(4412)
and 24” Front Fence
(4424)
Ultra Tracks to the
Brackets as shown by capturing the oval nuts in the T-slots in the track faces and
sliding them into place. Center the 12” Back Fence end-to end on the Bracket.
Keep the inner long edge of the Ultra Track flush with the long edge of
the Bracket and tighten the screws using the Allen Wrench
(5785)
.
Locate the end of the 24” Front Fence 6-1/2” from the end of
the Bracket near the Stationary Fence.
Align the inner long edge of the Front
Fence flush with the long inner edge
of the Bracket and tighten the screws
using the Allen Wrench
(5785)
.
ATTACH WORK STOPS & EDGE FENCE
The Work Stops attach to the edges of the 36” Ultra Tracks as shown.
Slide the head of a 1” hex bolt
(HB030)
into the outside T-slot on the edge of each 36” Ultra
Track. Place the Work Stop
(7900E - raised side first & overhanging end facing down)
on each bolt, a 1/4” bushing
(BUSH002)
and a Knob
(5540)
, then tighten.
Install the four 1” flat head screws
(MF015)
thru the four
countersunk holes in Edge Fence
(7900B)
and start an oval
nut
(5760B - flat side first)
on each screw end.
Install the Edge Fence in the T-slot
in the front edge of the 24” Front
Fence as shown. Center end-to-end, then
tighten the screws using a Phillips
screwdriver
(not provided)
.
24”
Front
Fence
12” Back
Fence
HB030 x4
BUSH002 x8
5540 x4
ATTACH ROUTER PLATE STOPS
Attach the Router Plate Stops by sliding the head of two 1” hex bolts
(HB030)
into
the innermost T-slot of each 36” Ultra Track. Place two 1/4” bushings
(BUSH002)
on each bolt, then start a Knob
(5540)
on each bolt and tighten.
5
4
6