LIMITED TOOL WARRANTY
WoodRiver makes every effort to ensure that its products meet high quality and durability standards.
WoodRiver guarantees that each product is free from defects in materials and grants to the original retail
customer a 90-day limited warranty from the date the product was purchased. Warranty does not apply
to defects due directly or indirectly to misuse, abuse, normal wear and tear, negligence or accidents,
repairs done by an unauthorized service center, alterations and lack of maintenance. WoodRiver shall
in no event be liable for death, injuries to persons or property, or for incidental, special or consequential
damages arising from the use of our products.
To take advantage of this limited warranty, please contact Woodcraft Technical Service at
1-800-535-4486 for more information. WoodRiver will either repair or replace the product, if an
examination proves that any parts covered under this warranty were defective in workmanship or
material during the warranty period.
PROOF OF PURCHASE
Please keep your dated proof of purchase for warranty and servicing purposes.
REPLACEMENT PARTS
To order parts, please contact Woodcraft Technical Service at 1-800-535-4486. Please use the indicated
letter listed in this manual for all part orders where applicable.
NOTE TO USERS
This instruction manual is meant to serve as a guide only. Specifications and references are subject to
change without prior notice.
STANDARD EQUIPMENT:
Miter Gauge, Fence, Flip-Stop, Wrenches and Hardware, Instruction Manual and Parts List.
PRODUCT SPECIFICATIONS:
• Positive Stops At 0°, 22
1
⁄
2
°, 30°, 45°, 60°, 67
1
⁄
2
° And 90° In Both Directions
• Adjustable Miter Bar Fits Snug Inside Standard
3
⁄
4
" x
3
⁄
8
" Miter Slots
• 17
1
⁄
2
"-Long Anodized Aluminum Fence Rail Adjusts Along Miter Gauge Head
• Flip-Stop Adjusts Along The Fence For Repeatable Accuracy
• Improve Safety And Accuracy On The Table Saw And The Router Table
