Woodbridge LT610, User Manual

Page: 6 / 12

R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
www.woodbridgebath.com
04
Usage Instruction
· Press " ∧ " or " ∨ " button when it is under function of rear cleaing or front cleaning, the indicator
light will be on showing current nozzle position, adjust nozzle position by 5 levels.
Water volume adjustment
· Press " + " or " - " button when it is under function of rear cleaing or front cleaning, the indicator
light will be on showing current water volume level, adjust water volume by 3 levels.
Spray nozzle position adjustment
Energy saver
Energy saving
Remark
Under energy saving mode, seat temperature is low(level 1) to achieve energy saving.
(Note: If the seat temperature before energy saving is neutral, keep the neutral after energy
saving)
Energy saving mode will be suspended and goes to function mode if someone uses the seat
in the middle of energy saving. The seat starts to heat immediately (without closing the seat
temperature), and the energy saving mode is restored after the human body leaves the seat.
DRY|DRYER TEMP
(Only applicable to implement with drying function)
②
In the process of drying, press the " " button to adjust the
air temperature, and the indicator light will light up to display the wind temperature
range. When the indicator light is not on, it is 0 grade (normal temperature range),
and the range adjustment mode is 0-5 grade in turn.
Normal
temperature
Grade 1 Grade 2 Grade 3 Grade 4 Grade 5
①
Press the " " button, the indicator light will light up, showing
the current air temperature range. It will stop drying automatically
after a cycle or after the human body leaves the seat.
Dry
喷嘴
喷嘴
Nozzle
Long press " " button to enter energy saving mode, long press " " button again to exit
energy saving mode.