Woodbridge LT610 User Manual Download Page 9

Page: 9 / 12

WOODBRIDGE

www.woodbridgebath.com

Other Operations

Quiet mode

· Press and hold the " " button and press the " " button to turn on/off quiet mode.

Sterilization function

· When user is not seated and cleaning/drying is off, long press “ ” button to turn on plasma sterilization
function.This function will stop automatically after 2 hours. During this mode, if any other button is
pressed or user is seated, it’ll stop automatically. (This function only applies to product with sterilization
function.)

Automatic pre-wetting button

· Press and hold the " " button and press the " " button to turn on or off the automatic pre-wetting
function. After the automatic pre-wetting function is turned on, the pre-wetting function is performed
when the user is detected to be seated. (This button combination is only for toilets with automatic
pre-wetting function.)

Foot sense switch

· Long press " " button to turn the foot sense function on or off.In the seated status, foot sense function
is invalid. (This function only applies to product with foot sense function.)

Tips:

· The buzzer will sound “ BEEP ” when the user presses one button which means the main unit receives
the signal and conduct the operation accordingly. If the buzzer doesn't sound, it means the main unit
doesn't receive the signal, please adjust the remote control direction and repress the button.
· In case of power cut during nozzle spray operation, the nozzle cannot go back to place,please wait until
the power is reset. In case of a power cut for a long period, please push the nozzle softly back by hand.
Do not push hard, to avoid damage to nozzle and electrical machine.

Other operations

User code

· Radio frequency remote control

①

Unplug to cut off the power supply of the toilet

②

First press " " button, then press " " button, the indicator light will flash.

③

Plug in the toilet and press the “reset” button.

④

The indicator stops flash and is on for 2s, means the remote control and the toilet are matched

successfully. The self-inspection of main unit is finished when it beeps once. Then the remote control