26
48D0139
Smart Thermostat
The Smart Thermostat
function
adjusts the flame height
in accordance
to the difference
between
the set point
temperature
and the actual
room temperature.
As the
room
temperature
gets closer to the set point, the Smart
Function
will
modulate
the flame down.
2.
To adjust
the set temperature,
press
the up
or
down-arrow
keys until the desired
set temperature
is displayed
on the LCD screen.
Key Lock
This function
will lock the keys to avoid unsupervised
operation.
2.
To deactivate
this function,
press the
MODE
and
UP
keys at the same time. The lock icon
will
disappear
from the LCD screen.
Low Battery Power Detection
Receiver
The life span
of the receiver
batteries
depends
upon
various factors:
battery
quality, Humber of appliance
ig-
nitions,
number
of
thermostat
set point changes,
etc.
'Vhen
the receiver
batteries
are low, no "beep"
will
sound from the receiver
when a transmitter
command
is sent. Replace
batteries
when this happens,
Transmitter
The life span of the transmitter
batteries
depends
upon
various
factors:
battery
quality, number
of appliance
ig-
nitions,
number
of thermostat
set point changes,
etc.
Manual
Override
If the
receiver
or
transmitter
batteries
are low or
de-
pleted,
the appliance
can still be turned
on manually.
1.
Move the
receivers
three-position
slider to the
ON
position. This
will
bypass the remote control
feature
of the system
and
the appliance
main
burner
will
turn
on.
Command Definitions
Pilot IPI / CPI
switch
Position of the
receiver slider switch
Command reference
name
Commanded Fireplace
State
Opened, IPI
“OFF”
“REMOTE”
and “OFF received”
Turn-OFF
Flames OFF
Opened, IPI
“ON”
“REMOTE”
and “ON received”
Turn-ON
Pilot + Main burner
flames ON
Closed, CPI
“OFF”
“REMOTE”
and “OFF received”
Pilot-ON
Pilot flame ON
Closed, CPI
“ON”
“REMOTE”
and “ON received”
Turn-ON
Pilot + Main burner
flames ON
(Transmitter
Operation"
Proflame
GTM
)
1.
To activate
this function,
press the
MODE and U
P
Figure
51a
-
Remot
H
Control
Displaying Smart
Thermostat Function
Figure
51b
-
Remot
H
Control
Displaying Key Lock
Mode
Figure
51c
-
Remote
Control Displaying Low Battery
1. To activate
this function,
press the Thermostat
key
until the word
"SMART"
appears
to the
right
of the
temperature
bulb on
the
LCD screen
(see Figure
51a
).
keys at the same time.
A
lock icon
will
appear
on the
LCD screen
(sec Figure
51b
).
When
the transmitter
batteries
arc low, an icon will
appeal'
on the LCD display
(see
Figure
51c
),
Replace
batteries
when this icon appears.
OPERA
TING INSTRUCTIONS
(continued)
3
7
Summary of Contents for DV2500-E
Page 46: ...127 6...
Page 47: ...127 6...
