30
31
If the flame is blue and only in the center, turn off unit and let cool. After unit cools, remove logs. If the back holes are
clear, add more rock wool to the center of the burner. Replace logs and check flame again. Save left over rock wool to refresh
when cleaning later. Too much rock wool can disturb the flame and cause sooting on the glass or logs.
FINAL INSTALLATION
(continued)
See Figure 40 below.
3.
Place right logs (#3) on right side of the burner aligning bottom notch with the right grate bar.
4. Place central log (#4) between left and right logs. Align the log bottom notch with central grate bar.
See Figure
41
.
Figure
40
- Placing
Front Right
Log (#
3
)
Figure
41
- Placing
Front Middle
Log (#
4
)
in Front of Rear Log
5. Replace the Glass Frame (see
Figure 36
).
IMPORTANT: Avoid ports when placing logs on burner.
6. Light unit and after 15 minutes, check burner f
l
ame and glow (See
Page 37
)
.
Summary of Contents for DV2500-E
Page 46: ...127 6...
Page 47: ...127 6...
