FINAL INSTALLATION
(continued)
of the burner. Doing so can cause damage of the burner and will void the manufacturer's warranty.
NOTE: IF YOU
HAVE INSTALLED THE LOG SET WITH EMBER MATERIAL, PLEASE SKIP THIS
P
AGE AND PROCEED STARTING WITH PAGE 34.
OPTIONAL GLASS MEDIA PLACEMENT
IMPORTANT: Never fire up the fireplace without proper media (glass media) covering the top
Only use approved media ordered from the manufacturer.
1.
Remove supplied glass media from its packaging and place over the burner top to cover it completely as shown on the
photograph.
2.
Proceed accordingly instructions on the next page.
If desired, place some media on rear support behind the burner, but avoid falling media into the gap in front
of the burner.
34
