09
When people sit, press “Front cleaning” button, it
will clean the front portion of body; repress “Front
cleaning” button or “Power” button, the function will
be finished. After a cycle, this function will be
finished automatically, if people keep sit, it will
switch to drying function, and will stop after a cycle.
1.When people sit, press “Rear cleaning” button, it
will clean the rear portion of body; repress “Front
cleaning” button or “Power” button, the function will
be finished. After a cycle, this function will be
finished automatically, if people keep sit, it will
switch to drying function, and will stop after a cycle.
· The operating method of remote control shows in instruction manual.
Power
1. Long press “Power” button to enter standby mode;
and then quick press “Power” button to restore
functional mode.
2. When people sit, press “Power” button to stop the
function of rear, front cleaning or drying. When no
one sits, press “Power” button to switch between
function mode and power save mode.
3.If the product is not used for continual 72 hours,the water in the tank will
automatically discharge for 90 seconds and replaced by fresh water,to avoid bacteria.
Remark:
1. When main unit is in functional mode, the light of power goes on and energy saver
light is off; When in energy save function, the light of power goes off, and energy
saver light is on; When in standby mode, both lights are off.
2.
The default setting of all function is on middle level, after using remote-controller,
shift to the level showing on remote-controller.
Function illustration of keys in main unit and actuator
Front
cleaning
button
Rear
cleaning
button
Function illustration of keys in remote-control and LCD display instruction
2.When no one sits,press “Rear cleaning” button,then
the wand will stretch out to clean the nozzle and
spray wand.