manualshive.com logo in svg

Wood Stone PHOENIX 3030 WS-PX-3030-RFG, Installation And Operation Manual, Page: 4 / 37

Share
Download
Wood Stone PHOENIX 3030 WS-PX-3030-RFG Installation And Operation Manual Download Page 4

Phoenix Installation and Operation Manual

4

CAUTIONS & WARNINGS

An ongoing program of product improvement may require us to change
specifications without notice. 

Phoenix Ovens, 

Revised January 2015.                               Doc no: M0029.04

[email protected]

 

or visit 

woodstone-corp.com

wood stone corporation

1801 w. bakerview rd.
bellingham, wa 98226 usa

t. +1.360.650.1111
f. +1.360.650.1166

WOOD STONE PHOENIX GAS OVEN

INSTALLATION AND OPERATING INSTRUCTIONS

DO NOT THROW THIS MANUAL AWAY

IT IS RECOMMENDED THAT THIS OVEN BE INSTALLED, MAINTAINED AND SERVICED 

BY AUTHORIZED PROFESSIONALS.

IMPORTANT: 

Consult your local gas supplier for a statement outlining a procedure to be followed in the event you 

smell gas. Post the statement in a prominent location.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

Additional copies of this manual are available at woodstone-corp�com� 

For prompt responses to service/maintenance questions, call your local distributor�

FOR YOUR SAFETY: 

Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any 

other appliance. 

WARNING: 

Improper installation, adjustment, alteration, service or maintenance can result in property damage, 

injury or death. Read the installation, operation and maintenance instructions thoroughly before installing or 
servicing this equipment.

IF THIS OVEN IS NOT PROPERLY INSTALLED A FIRE MAY RESULT. TO REDUCE THE RISK OF FIRE, FOLLOW THESE INSTALLATION 
INSTRUCTIONS. A MAJOR CAUSE OF OVEN RELATED FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES) 
TO COMBUSTIBLE MATERIALS. IT IS OF THE UTMOST IMPORTANCE THAT THIS OVEN BE INSTALLED ONLY IN ACCORDANCE 
WITH THESE INSTRUCTIONS.

THIS APPLIANCE IS FOR PROFESSIONAL USE BY QUALIFIED PERSONNEL. THIS APPLIANCE 
MUST BE INSTALLED BY QUALIFIED PERSONS IN ACCORDANCE WITH THE REGULATIONS 
IN FORCE. THIS APPLIANCE MUST BE INSTALLED WITH SUFFICIENT VENTILATION TO 
PREVENT THE OCCURRENCE OF UNACCEPTABLE CONCENTRATIONS OF SUBSTANCES 
HARMFUL TO HEALTH IN THE ROOM IN WHICH IT IS INSTALLED. THIS APPLIANCE NEEDS 
AN UNOBSTRUCTED FLOW OF FRESH AIR FOR SATISFACTORY COMBUSTION AND MUST 
BE INSTALLED IN A SUITABLY VENTILATED ROOM IN ACCORDANCE WITH CURRENT 
REGULATIONS. THIS APPLIANCE SHOULD BE SERVICED BY QUALIFIED PERSONNEL AT LEAST 
EVERY 12 MONTHS, OR SOONER IF HEAVY USE IS EXPECTED.

!

Summary of Contents for PHOENIX 3030 WS-PX-3030-RFG






































Reviews:

No comments