manualshive.com logo in svg

Wood Stone PHOENIX 3030 WS-PX-3030-RFG, Installation And Operation Manual, Page: 24 / 37

Share
Download
Wood Stone PHOENIX 3030 WS-PX-3030-RFG Installation And Operation Manual Download Page 24

Phoenix Installation and Operation Manual

24

DISASSEMBLY

An ongoing program of product improvement may require us to change
specifications without notice. 

Phoenix Ovens, 

Revised January 2015.                               Doc no: M0029.04

[email protected]

 

or visit 

woodstone-corp.com

wood stone corporation

1801 w. bakerview rd.
bellingham, wa 98226 usa

t. +1.360.650.1111
f. +1.360.650.1166

Follow these instructions if you need to disassemble the appliance to move it through a narrow door or passageway� If you also need 
to tip the oven, see the LIFTING THE OVEN section�

Unplug thermocouple 

wire and coil it to prevent 

damage while moving the 

main body.

Unplug igniter wires and 

coil them up and tuck them 

into the burner.

Disconnect pilot tube at the gas valve and at the 

union. Carefully bend the remaining length of tube 

from the pilot up inside the burner assembly to 

protect it.

Remove the flexible gas 

connector.

1.

Summary of Contents for PHOENIX 3030 WS-PX-3030-RFG






































Reviews:

No comments