manualshive.com logo in svg

Wood Stone FIRE DECK 11260 WS-FD-11260-CL, Installation And Operation Manual, Page: 10 / 40

Share
Download
Wood Stone FIRE DECK 11260 WS-FD-11260-CL Installation And Operation Manual Download Page 10

Fire Deck FD-9660 & FD-11260 Coal-Fired Oven 

Installation and Operation Manual

 

PG 

10 

OF

 40

M0292.00  JANUARY 2019

PLACING & INSTALLATION

PLACING THE OVEN

The oven must be installed on a flat level surface� The weight of the oven is carried by the full perimeter of the oven stand� If it is 
necessary to shim the oven for leveling purposes, it is critical that the shim material be metal, and that the shims are installed in such 
a way that the full perimeter of the stand is solidly supported� Any gaps created by shimming between the oven and the floor must be 
sealed to prevent airflow issues beneath the oven� 

Failure to solidly support the full perimeter of the oven stand can result in 

costly damage to the oven and will void the warranty. 

The floor design and construction must be adequate to handle the weight of the oven�  
Please see 

woodstone-corp.com/installation_footprints.htm

 

for floor loading information�

TOE KICK AND FORK POCKET COVERS

FORK POCKET 

COVER 

INSTALLATION

Toe kick

Fork pocket covers

(Both sides & rear)

Fork pocket covers

(Both sides & rear)

Once the oven is in place, the Toe Kick must be installed along the front of the oven using the screws provided� Additionally, 

the side 

and rear Fork Pocket Covers must be installed the fork pockets for the oven to operate safely.

 The area under the oven must 

be enclosed in order to prevent pests from entering this space and to prevent air flow issues which can detrimentally effect Burner 
operation�
If the front of the oven is shipped facade ready, the Toe Kick will not be included� If the sides and/or rear of the oven is shipped facade 
ready, the Fork Pocket Covers will not be included� Pre-cut blocks of cement board or other facade material will be shipped instead of 
the Fork Pocket Covers� The blocks must be inserted into the Fork Pockets before the oven facade is put in place�

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INST

ALLER

Fork P

ock

et Co

ver 

MUST 

be 

installed

 

over pock

et for o

ven

to oper

ate pr

operly

.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

REAR FORK POCKETS

Pocket covers 

arrive  

fastened in 

temporary UP 

position.

Unfasten, lower 

over each fork 

pocket, and 

refasten.

Ü

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INST

ALLER

Fork P

ock

et Co

ver 

MUST 

be 

installed

 

over pock

et for o

ven

to oper

ate pr

operly

.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INST

ALLER

Fork P

ock

et Co

ver 

MUST 

be 

installed

 

over pock

et for o

ven

to oper

ate pr

operly

.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

GAS INLET SIDE FORK POCKETS

Unfasten,  

place one cover 

over each fork 

pocket, and 

refasten.

Two pocket covers  

will arrive fastened in  

temporary UP  

position above front-

most fork pocket.

Ü

Ü

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INST

ALLER

Fork P

ock

et Co

ver 

MUST 

be 

installed

 

over pock

et for o

ven

to oper

ate pr

operly

.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

L1217

ATTENTION INSTALLER

Fork Pocket Cover 

MUST be installed 

over pocket for oven

to operate properly.

NON-GAS INLET SIDE FORK POCKETS

Pocket covers 

arrive  

fastened in 

temporary UP 

position.

Unfasten, lower 

over each fork 

pocket, and 

refasten.

Ü

Note: 

Additional 

Tek screws 
supplied in 
hardware kit.

Summary of Contents for FIRE DECK 11260 WS-FD-11260-CL









































Reviews:

No comments