Wood-mizer TVS-FT Series, User Manual, Page: 75 / 116

ALIGNMENT
Blade Wheel Alignment
MHdoc031016 5-7
5
See Figure 5-6.
5. Measure the distance from the edge of the LTBGAT tool to the rope. The distances
marked A, B, C and D must be equal. If the measurements are different, correct this using
the drive-side blade wheel adjustment bolts.
IMPORTANT! Before adjusting the drive-side wheel, loosen
the drive belt. See Section 5.6
See Figure 5-7.
FIG. 5-6
FIG. 5-7
tvs_198_A
Top surface edges of
chain guide aligned
with ropes on the
whole length
!
A B
C
LTBGAT
D
A=B=C=D
Blade
Rope