Wood-mizer TVS-FT Series, User Manual, Page: 35 / 116

OPERATION
Machine Start
Operation MHdoc031016 2-18
2
from 0 to ca. 25 m (82 ft) per minute.
Turn the switch clockwise to increase the feed rate, counterclockwise to slow the feed
rate down.
Factors that will determine what feed rate you can use include:

Log diameter.

Hardness of material to be cut. Some woods that are seasoned or naturally very
hard will require slower feed rates.

Sharpness of blades. Dull or improperly sharpened blades will require slower feed
rates than sharp and properly maintained blades.

Off-bearing capability. Your ability to feed will also determine what feed rate you can
use.
FIG. 2-9
I
II
STOP
START
STOP
START
STOP
TBS 01 Setworks
Real Size (mm)
Check real size
AUTO
CAL.
SAVE
SET
ABCDE
Position Size (mm)
ENTER
A
B
C D E
SET
REAL SIZE