Wood-mizer TVS-FT Series, User Manual, Page: 48 / 116

SETWORKS OPERATION (Optional Equipment)
Operation, Memory Buttons (A, B, C, D, E)
3
3-6 SW-07doc031016 SETWORKS OPERATION (Optional
See Pic. 3-4.

To use the stored value, press the required memory button and confirm by pressing .
The saw heads will move to the stored width.
NOTE: If, during normal operation, the “Check real size” lamp starts
blinking, press and hold the button. Measure and enter the
distance between the saw heads with an accuracy of 0,1 mm
(0,0039”). For example: if you want to enter 102mm - press
1-0-2-0
without any pauses and confirm by pressing .
PIC. 3-4
TBS 01 Setworks
Real Size (mm)
Check real size
AUTO
CAL.
SAVE
SET
ABCDE
Position Size (mm)
ENTER
A
B C D
E
SET
REAL SIZE
ENTER
SET
REAL SIZE
SAVE