Sawmill Setup
Portable Sawmill Setup
3
3-3
60HDdoc011304
Sawmill Setup
3.2
Portable Sawmill Setup
WARNING!
Do not set up the mill on ground with more than
a 10 degree incline. If setup on an incline is necessary, put
blocks under one side of the mill or dig out areas for outrig-
ger legs to keep mill level. Setting up the mill on an incline
could cause it to tip over, resulting in serious personal
injury.
WARNING!
Chock the trailer wheels to prevent movement
before unhitching it from the towing vehicle. Failure to do so
may result in serious injury or death.
WARNING!
Always make sure the trailer is supporting the
sawmill frame when operating a sawmill with adjustable
outriggers. Failure to do so may result in serious injury or
death. The adjustable outriggers are intended to support
the saw frame with assistance from the trailer.
1.
Unhitch the mill from the vehicle.
2.
Lower and set the front outriggers. To lower the leg, first place a 19 socket wrench on the
outrigger adjustment bolt and turn the bolt until the outrigger movable part reaches its
highest position. Next pull the locking pin out of the outrigger hole. When the outrigger
contacts the ground, release the pin. Then place a 19 socket wrench on the outrigger
adjustment bolt and turn the bolt until the locking pin enters the nearest outrigger hole.
WARNING!
Put front outrigger down before moving cutting
head from the rest position. Failure to do so may result in
serious injury.
