Sawmill Setup
Portable Sawmill Setup
Sawmill Setup
60HD-R10doc072619
3-7
3
3.2
Portable Sawmill Setup
WARNING!
Set up the mill on the flat ground. If setup on an
incline is necessary, put blocks under one side of the mill or
dig out areas for outrigger legs to keep mill level. Setting up
the mill on an incline could cause it to tip over, resulting in
serious personal injury.
WARNING!
Chock the trailer wheels to prevent movement
before unhitching it from the towing vehicle. Failure to do so
may result in serious injury or death.
WARNING!
Always make sure the trailer is supporting the
sawmill frame when operating a sawmill with adjustable
outriggers. Failure to do so may result in serious injury or
death. The adjustable outriggers are intended to support
the saw frame with assistance from the trailer.
WARNING!
The adjustable outriggers supplied with porta-
ble sawmills are not intended for setup on concrete or other
hard surfaces. Long-term use of the adjustable outriggers
on hard surfaces may cause the outriggers to fail, causing
the sawmill to drop. This could result in possible serious
injury or death.
If setting the sawmill up on concrete or other hard surface,
replace the adjustable outrigger legs with stationary legs.
1.
Unlatch the mill from the vehicle.
2.
Lower and set the front three outriggers. See the Fine Adjust Outrigger (FAO) manual for
outrigger operation instructions.
WARNING!
Put front outrigger down before moving cutting
head from the rest position. Failure to do so may result in
serious injury.
