Sawmill Alignment
Blade Guide Arm Alignment
7
7-6
HD-R10doc072619
Sawmill Alignment
See Figure 7-5.
Loosen the horizontal adjustment bolt jam nuts. To tilt the arm in toward
the blade, loosen the rear bolt and tighten the front bolt. To tilt the arm out away from the
blade, loosen the front bolt and tighten the rear bolt. Retighten the jam nuts and recheck
the blade guide arm horizontal tilt.
5.
Now check the vertical tilt of the blade guide arm. Move the saw carriage so the blade
guide arm is positioned over a bed rail.
6.
With the arm 1/2" (13 mm) from fully closed, raise or lower the saw head until the bottom
of the blade guide block is 15" (375 mm) from the top of the bed rail.
FIG. 7-5
600025-1B
Front
Horizontal
Adjustment Bolt
Rear
Horizontal
Adjustment Bolt
