Installation Procedure
Sensor Installation (Rev. A.00)
Installation Procedure
AS00doc032519
1-11
1
1.3
Sensor Installation (Rev. A.00)
NOTE:
The sensor mounting brackets were redesigned in
April 2001.
not look like the ones shown below.
1.
Install the lower mount clamp (with large hole) flush with the threaded portion at the base
of the sensor. Use two of the provided 1/4-20 x 3/4” flat socket head bolts to secure a
mounting block to the clamp. Note the orientation of the sensor, mount clamp and mount-
ing block. The clamp and block should be oriented as shown to ensure proper assembly
to the sawmill. The sensor should be oriented so the specification label faces away from
sawmill bed. Use one of the provided 1/4-20 x 1” socket head bolts to secure the clamp to
the sensor.
See Figure 1-9.
FIG. 1-9
Sensor
Lower Mount
Clamp (Note Orientation)
Mounting Block
(Note Orientation)
1/4-20 x 3/4”
Flat Socket Head Bolts (2)
1/4-20 x 1”
Socket Head Bolt
3H0817-1C
Specification Label
