Setup & Operation
Using Auto-Down Mode
1
1-21
60AS-R02doc032519
Setup & Operation
1.3
Using Auto-Down Mode
See Figure 1-17.
Starting with a new log, position the saw head to make the first trim cut.
Push the Auto-Down button under the display. The first Increment Setting is displayed by
default. Choose the desired increment setting by pushing the appropriate Increment Set-
ting button.
FIG. 1-17
3H0822
In Manual Mode,
position blade
for trim cut. Switch
to Auto-Down and
make trim cut.
Cut first face as
desired in Auto-Down
Mode then turn
log.
Switch to Manual Mode
and position blade
for trim cut. Switch to
Auto-Down and make
trim cut.
Cut second face as
desired in Auto-Down
Mode then turn
log.
Switch to Manual Mode
and position blade
for trim cut. Switch to
Auto-Down and make
trim cut.
Cut third face as
desired in Auto-Down
Mode then turn
log.
Switch to Manual Mode
and position blade
for trim cut. Switch to
Auto-Down and make
trim cut.
Cut final face as
desired in Auto-Down
Mode.
Switch to Manual Mode
and edge flitches.
