32
Mini Boiler Owners Manual
2015
Maintenance
Once a month each turbulator will need to be removed
and cleaned.
Brush out each of the heat transfer tubes once a month
when the turbulators are removed for cleaning.
Slide each turbulator up and down to loosen. Insert a
J hook into the chuck of a drill and hook the handle of
the turbulator into the J hook. With the drill in a me
-
dium drive setting that will allow the drill to ratchet,
slowly start spinning the turbulator while moving it
in an up and down motion. Increase the speed of the
drill to allow the turbulator to rattle inside of the tube.
Repeat this process for each turbulator.
