16
Mini Boiler Owners Manual
2015
Installation
1. Lay the hoppers main body on it’s side and attach
the legs by inserting the bolts and securing them on
the inside of the hopper body with the supplied hard
-
ware.
Poly Pellet Hopper Assembly
The optional pellet hopper holds approximately 280 pounds of pellets. Northwest Manufacturing, Inc. recom
-
mends using our pellet hopper to ensure proper fuel flow and to protect the pellets from the elements.
5. Slide the inlet pipe over the auger tube. The hole
in the inlet pipe should be 180 degrees towards the
outlet on the T-pipe.
6. Fasten the screw shown to lock the inlet pipe in
place.
7. Slide the blue tube to the outlet of the T-pipe, and
the cap on the end of the inlet pipe. The auger is now
ready to be installed.
