SmartStream User’s Guide
10
Revision 1.06.0 ; Jan. 10, 2012
PC2TV Application
2.2.2
Waiting for Connection on SmartStream adapter
You have to power on the SmartStream adapter, wait for a while, and the waiting screen
w ould be shown on your TV / Monitor.
If you want to connect SmartStream adapter by Ethernet, it is suggested to connect
Ethernet cable before powered it on. Please also refer to
Section 2.2.3.1
and
Section 7.1
.
The screen of
SmartStream adapter
should stay at the
standard w aiting
screen as the picture.
The device
information, Wi-Fi
configuration, IP
address, and firmware
version are shown
here.
For the connection of
Wi-Fi Direct mode, the
w aiting screen w ould
only show pin code on
the TV / Monitor,
please refer to
Section
2.2.3.2
.