77
Dynamic Entry Count
Count the ARP table dynamically learnt.
Click
Submit
to apply the configuration.
3.8.2 IP INTERFACE SETTING
Through this page, user is allowed to enable the IP Routing interface and assign the IP Address. First create the VLAN
Interface and assign the member port to the VLAN before creating IP Interface, please refer to the VLAN
Configuration page. The IP Interface table listed all the created VLAN automatically; user can change the setting for
each VLAN here.
IP Interface
TERMS
DESCRIPTION
Interface
The name of the IP interface.
Status
After enabled the routing state, the Status shows
Up
. After disabled the routing state, the
status shows
Down
State
Enable or Disable the IP Routing Interface state. After disabled, the interface just work as
a layer 2 VLAN. After enabled, the interface can support IP routing feature.
IP Address
Assign the IP Address for the target IP Interface.
Subnet Mask
Choose the subnet mask here. For example, 255.255.255.0 represents for the typical Class
C, or so-call 24-bits mask. There are 256 IP Addresses within the range.
Alias IP Table
TERMS
DESCRIPTION
Interface
Select the interface.
Alias IP Address (A.B.C.D/M)
The alias IP and its subnet mask
