51
Edge Port
A port directly connected to the end stations cannot create a bridging loop in the network. To
configure this port as an edge port, set the port to the
Enable
state. When the non-bridge device
connects an admin edge port, this port will be in blocking state and turn to forwarding state in 4
seconds.
Once user finished user configuration, click on
Submit
to save user settings.
RSTP Status
This page allows user to see the information of the root switch and port status.
Root Status:
User can see root Bridge ID, Root Priority, Root Port, Root Path Cost and the Max Age, Hello Time and
Forward Delay of BPDU sent from the root switch.
Port Status:
User can see port Role, Port State, Path Cost, Port Priority, Oper P2P mode, Oper edge port mode and
Aggregated (ID/Type).
